ITM4 Genesis

3-Inch HVAC Plenum Access Doors

Unique pan-in-pan design creates a solid, esthetically pleasing access door with optional modifications.

3-Inch HVAC Plenum Access Doors

DoorIcon_GPA2_175x200Genesis 3″ HVAC Plenum Access Doors are ideal for Modular Framing Systems or custom HVAC plenum wall panel construction air handlers The GPA3 series is available in both through metal design or with the ITM4 non-through-metal thermal break technology for higher thermal performance applications. Also choose between our in-swing and out-swing options for positive and negative pressure environments.

  • Extensively ETL tested
  • Meets UL 1995 safety standard compliance for heating and cooling equipment and NFPA 90
  • Stainless steel piano hinge
  • 20-gauge galvanized steel panels standard
  • Polyurethane foam insulation
  • One-piece Santoprene gasket, a UL recognized component

Certifications & Compliance

cert_ulcert_dade-county

 

3-Inch HVAC Plenum Access Doors

technology_nonthermal2Genesis 3″ HVAC Plenum Access Doors are ideal for Modular Framing Systems or custom HVAC plenum wall panel construction air handlers The GPA3 series is available in both through metal design or with the ITM4 non-through-metal thermal break technology for higher thermal performance applications. Also choose between our in-swing and out-swing options for positive and negative pressure environments.

3-Inch HVAC Plenum Access Doors

technology_thermalThe Genesis 3″ Access Door with the ITM4 thermal-break technology uses a non-through metal design with H-clip separation between two galvanized steel panels. This thermal-break door is perfect for 3″ wall thickness air handling units and in environments that demand less condensation, small temperature loss and rigid safety requirements.

nomen-gpa-gpatb

Wall Panel

Looking for
HVAC Wall Panels?

Genesis 3″ Plenum
Wall Panels

Complete your custom commercial HVAC air handling unit with 3-inch plenum wall and roof panels.

LEARN MORE

Need an Estimate?

REQUEST A QUOTE

Technology

Innovative technologies to advance the HVAC door
and air handler industry.

Foam
Polyurethane Foam
Genesis Access Doors include industry-approved polyurethane foam insulation for a superior seal, thermal characteristics and door rigidity to meet stringent Indoor Air Quality applications.
Custom Sizing
Custom Sizing
Our Genesis doors and plenum walls can be custom built to meet your specifications. We can create a custom sizing solution for any project.
Viewport
Viewport Ready

ITM4 Viewports offer increased visibility and accessibility to any Genesis door. Our thermal break and non-thermal break viewports are easy to install or replace in the field. 

latch
Latch Technology
ITM4 uses Ventlok and Allegis Latches to give you a custom fit while maintaining the tightest seal in the industry. Our engineering team will help you select the most appropriate latch for your project. 
Phone number

(763) 497-0842

clock

Hours
Mon-Fri: 8am - 5pm CST